Sorotec Has 20 Years Manufacturing Experience In Power Supply
Language
HOME
PRODUCTS
Inverter
Off Grid Solar Inverter
Hybrid Solar Inverter
MPPT Solar Controller
Micro Inverter
Hybrid ALL-IN-ONE
Hybrid Solar Commercial Inverter
UPS
High Frequency Online UPS
Low Frequency Online UPS
Telecom Power Solutions
Lithium Iron Battery
SERVICE
CASES
NEWS
Exhibition News
Blog
ABOUT US
CONTACT US
Blog
HOME
>
NEWS
>
Blog
VR
Exhibition News
Blog
Exhibition News
Blog
NEWS
Exhibition News
Blog
Send your inquiry
*
Name
Format error
*
E-mail
Format error
*
Phone/WhatsApp/Skype
Format error
*
Company Name
Format error
*
Content
Format error
Submit
What are the characteristics of solar controllers?
The use of solar energy is becoming more and more popular, what is the working principle of the solar controller? The solar controller uses a single-chip microcomputer and special software to realize intelligent control and accurate discharge control using battery discharge rate characteristic correction. The following inverter manufacturers will give a detailed introduction:
December 13, 2021
Principle And Application Of Solar Inverter
At present, China’s photovoltaic power generation system is mainly a DC system, which is to charge the electric energy generated by the solar battery, and the battery directly supplies power to the load. For example, the solar household lighting system in Northwest China and the microwave station power supply system far away from the grid are all DC system. This type of system has a simple structure and low cost. However, due to the different load DC voltages (such as 12V, 24V, 48V, etc.), it is difficult to achieve standardization and compatibility of the system, especially for civilian power, as most of the AC loads are used with DC power. It is difficult for the photovoltaic power supply to supply electricity to enter the market as a commodity. In addition, photovoltaic power generation will eventually achieve grid-connected operation, which must adopt a mature market model. In the future, AC photovoltaic power generation systems will become the mainstream of photovoltaic power generation.
November 25, 2021
The technical development direction of inverter
Before the rise of the photovoltaic industry, inverter or inverter technology was mainly applied to industries such as rail transit and power supply. After the rise of the photovoltaic industry, the photovoltaic inverter has become the core equipment in the new energy power generation system, and is familiar to everyone. Especially in developed countries in Europe and the United States, due to the popular concept of energy saving and environmental protection, the photovoltaic market developed earlier, especially the rapid development of household photovoltaic systems. In many countries, household inverters have been used as household appliances and the penetration rate is high.
February 10, 2022
Common solar inverter technical problems and solutions
1. The temperature of the back of the inverter is a little high when it is working. Is this normal?Answer: This is normal, because the whole inverter dissipates heat through the heat sink on the back, and the inverter can only operate normally if the heat dissipation is normal. However, the normal operating ambient temperature is generally within 60 degrees. If it is too high, the inverter will run with reduced load. During installation, it is recommended to install the inverter in a cool and ventilated place to avoid exposure to the sun.
March 30, 2022
Upgrade Your Power System with Sorotec Telecom Power Solutions
January 17, 2025
Characteristics Of Solar Power Generation
Solar photovoltaic power generation has many unique advantages:1. Solar energy is an inexhaustible and inexhaustible clean energy, and solar photovoltaic power generation is safe and reliable, and will not be affected by the energy crisis and unstable factors in the fuel market.
November 25, 2021
SOROTEC REVO HMT 11kW inverter: High efficiency for every kilowatt hour of electricity
August 23, 2024
Installation Precautions for PV Inverter
Precautions for inverter installation and maintenance:1. Before installation, check whether the inverter is damaged during transportation.2. When choosing the installation site, it should be ensured that there is no interference from any other power and electronic equipment in the surrounding area.3. Before making electrical connections, be sure to cover the photovoltaic panels with opaque materials or disconnect the DC side circuit breaker. When exposed to sunlight, the photovoltaic array will generate dangerous voltages.
January 19, 2022
Use And Maintenance Of Solar Inverters
The use of solar inverters:1. Connect and install the equipment in strict accordance with the requirements of the inverter operation and maintenance manual. During installation, you should carefully check: whether the wire diameter meets the requirements; whether the components and terminals are loose during transportation; whether the insulation should be well insulated; whether the grounding of the system meets the requirements.
November 25, 2021
What Should You Pay Attention to When Installing Solar Inverters?
December 13, 2024
The Star of Home Energy Solutions
December 06, 2024
Which Battery is Best for Solar Power Systems?
November 26, 2024
No more~~
1
2
3
...
8
Copyright © 2025 SHENZHEN SORO ELECTRONICS CO., LTD. - www.sorotecpower.com All Rights Reserved.
Design
linkedin
whatsapp
whatsapp
facebook
twitter
share
Share
Send Inquiry
Chat Now
Send your inquiry
Name
E-mail
Format error
Phone/WhatsApp/Skype
Company Name
Content
SEND INQUIRY NOW
Choose a different language
╳
English
Türkçe
ภาษาไทย
Bahasa Melayu
Lëtzebuergesch
русский
Português
한국어
italiano
français
Español
Deutsch
العربية
Current language:English
SEARCH
Send Your Inquiry
*
Name
Phone
*
E-mail
*
Content
Please enter the calculation result.
Please enter the calculation result.
Verification failed. Please re-enter.