48VDC Outdoor Solar Power System Telecom Base Station SHW48250
Application: power plant or substation power for controlling, protection and automatic device, emergency lighting, communications, steam turbine DC oil pump and so on independent DC systems. It can provide reliable power supply in the case of a power failure completely in plant or substation. The traditional DC systems connect battery pack and run with float charging mode. The new DC system run with silicon controlled rectifying power supply for battery.
It is required to pass on-site quality control tests. It will be inspected with regard to seam slippage, color shading, color matching, and symmetry.
Guided by scientific and technological innovation, SOROTEC always keeps outward-oriented and sticks to the positive development on the basis of technological innovation. telecom dc power systems If you are interested in our new product telecom dc power systems and others, welcome you to contact us.SHENZHEN SORO ELECTRONICS CO., LTD.'s customer service can stay focused on its goals to achieve the right balance.
Key Features:
1.Adopt advanced MCU microprocessor control technology.
2.Advanced MPPT Technology.High converting efficiency higher than 97% for minimizing energy loss.
3.Reversed current protection at night.over voltage and reverse polarity protection.
4.Capable of selection different charging mode fo various types of batteries.
5.Protection degree:IP55.
6.Industy-leading power density compact size and high reliability.
7.Doorframe designed with waterproof structure, posted on the seal and equipped with wateerproof lock in the door double insulation design.
8.Cabine adopt quality galvanized wheet or aluminum coated steel sheet as material, surfce coating anti-UV power.
9.Suitable for outdoor installation.
10.With remote monitoring system aperation.
Fine dust-proof, water-proof features, According to the overall standard of design dust-proof and water-proof Ip55
1.With sun protection, heat insulation, roof ventilation
2.With waterproof and the filtration dust inlet, the cabinet front door shutters.
SHW48250 Solar System | Rectifier Module(1-10) MPPT Solar Charge Controller(1-10) |
INPUT | |
MPPT Range @Operating Voltage | 60 ~150VDC |
Maximum PV Array Power | 3000W |
Maximum Input Current | 62A |
OUTPUT | |
Nominal Battery Voltage | 42-58VDC |
Maximum Charge Current | 50A(max:61A) |
Maximum Efficiency | 98% |
Charging Method | Three stages: bulk, absorption and floating |
PROTECTION | |
Overload Protection | > 110% : audible alarm |
Overcharge Protection | Yes |
Polarity Reversal Protection @Solar Cell & Battery | Yes |
INDICATORS | |
LCD Panel | LCD panel indicating solar power, load level, battery voltage/capacity, charging current, and fault conditions |
LED Display | Three indicators for solar, charging, and load status |
Rectifier Module | |
Rated input voltage | 220V |
AC input Voltage range AC | 90-290V |
input Frequency range | 45-65HZ |
Power factor | ≥0.99 |
Efficiency | >92% |
Rated output voltage | 48V |
Rated output current | 0-50A |
Voltage range | 42-58V |
WIND CONTROLLER: | |
Input Power | 1KW/2KW |
Input Voltage | 150-300VAC |
Output Voltage | 48VDC |
Ouput Current | 30A/50A |
ENVIRONMENT | |
Humidity | 0 ~ 100% RH (No condensing) |
Operating Temperature | -20°C to 55°C |
Storage Temperature | -40°C to 75°C |
Altitude | 0 ~ 3000 m |